Kategorien

CRU WiebeTech SATA & PATA Adapter Kit #7

CRU WiebeTech SATA & PATA Adapter Kit #7
Views: 907 Art.Nr.: 2424
Gewicht: 1.4 kg
Verfügbarkeit: Pre-Order
379,00 € incl. 19 % MwSt. zzgl. Versandkosten Preis ohne MwSt. 318,49 €
+ Warenkorb Menge

SATA & PATA Adapter Kit #7

Seven adapters compatible with v5 docks: 2.5in & 1.8in IDE, ZIF, mini PCIe, mSATA, MBA2010

CRU WiebeTech SATA and PATA Adapters are easy to use ! Just attach a SATA or PATA Adapter to your drive dock, and access many kinds of drives including:

●  Toshiba 1.8 inch drives (the type used in many iPods)
●  SATA drives, either 2.5 or 3.5 inch size
●  2.5 inch Notebook Drives and Hitachi 1.8 inch drives
●  PCCARD drives, as used in PCMCIA slots,
●  and PCMCIA adapters for Compact Flash, Sony Memory Stick, SD, MC
●  Hitachi 1.8 inch ZIF drives
●  1.8 inch Toshiba ZIF drives
●  Disk on Module (DOM) drives
●  SATA, PATA, and USB types of mini PCIe
●  SATA Adapter for mSATA (mini-SATA) drives
●  MacBook Air 2010 Adapter

SATA and PATA adapters work on Mac OS, Windows, and work great with backup and forensic imaging software. When used with a dock all data transfer through Adapters is Write-Blocked.

1. Installation Steps
1.1 General instructions for all adapters
a. Connect the drive to the adapter.
b. Attach the data cable (SATA or IDE cable) from the dock to the adapter
c. Attach the dock’s 4-wire power connector to the adapter.
d. Plug the AC adapter into the dock.
e. Connect the dock to the computer. Use one of the dock’s available data connections.
f. Turn on the dock’s power switch. The drive in the adapter will spin up and you will be able to access it.

1.2 Adapter for 1.8-inch Toshiba Drives
Usage: 1.8“ Toshiba drive, commonly found in iPods
a. Attach the dock’s 4-wire power connector to the adapter then connect the dock’s IDE ribbon cable to the adapter’s 40-pin IDE interface.
b. Connect the drive to the adapter, label-side down.
c. Plug the AC adapter into the dock.
d. Connect the FireWire or USB2 cable to the computer, and then to the dock.
e. Turn on the dock’s power switch. The drive in the adapter will spin up and you will be able to access it.

1.3 Multi-card Adapter
Usage: PCMCIA (PCCARD) drives, MMC/SD, CompactFlash I/II, Sony Memory Sticks, and 1.0“ Microdrives.
a. Attach the dock’s 4-wire power connector to the base adapter (the largest of the three pieces). Connect the dock’s IDE ribbon cable to the base adapter’s 40-pin IDE interface.
b. If you are attempting to access a PCMCIA drive, connect the drive directly to the base adapter. Otherwise, attach the secondary adapter that is appropriate for the media type you wish to access. Use the MCB-1 adapter for Compact Flash or MicroDrives. Use the MCB-2 adapter for other media types.
c. Plug the AC adapter into the dock.
d. Connect the FireWire or USB2 cable to the computer, and then to the dock.
e. Turn on the dock’s power switch. The drive in the adapter will spin up and you will be able to access it.

1.4 Adapter for Disk-on-Module (DOM) flash disks
Usage: Disk on Module flash disks
a. Attach the dock’s 4-wire power connector to the adapter then connect the dock’s IDE ribbon cable to the adapter’s 40-pin IDE interface.
b. Attach the Disk on Module drive to the appropriate slot on the adapter. (There are two different slots. Use only one at a time.)
c. Plug the AC adapter into the dock.
d. Connect the FireWire or USB2 cable to the computer, and then to the dock.
e. Turn on the dock’s power switch. The drive in the adapter will spin up and you will be able to access it.

1.5 Adapter for mini PCIe modules
Usage: mini PCIe modules
a. Attach the dock’s 4-wire power connector to the adapter then connect the dock’s IDE ribbon cable to the adapter’s 40-pin IDE interface.
b. Connect the mini PCIe module to the adapter.
The PCIe connector includes a „spring load“ for proper connector contact. When a SSD is installed in the PCIe connector, the SSD is at an angle.
c. Strap down the mini PCIe module using the velcro straps.
d. Plug the AC adapter into the dock.
e. Connect the FireWire or USB2 cable to the computer, and then to the dock.
f. Turn on the dock’s power switch. The drive in the adapter will spin up and you will be able to access it.

 

Product name SATA & PATA Adapters
Drive Types Supported
  • PATA/IDE 2.5" drives (PATA Adapter 25 only)
  • Hitachi 1.8" drives (PATA Adapter HIT-18-ZIF only)
  • Toshiba 1.8" drives (PATA Adapter TOSH-18 only)
  • Compact Flash (PATA Adapter MCB only)
  • SD Card (PATA Adapter MCB only)
  • Memory Stick (PATA Adapter MCB only)
  • PCMCIA (PATA Adapter MCB only)
  • MacBook Air 2010 (SATA Adapter MBA2010 only)
  • MSATA (SATA Adapter mSATA only)
  • MC (PATA Adapter MCB only)
  • DOM (PATA Adapter DOM only)
  • PCIe PATA (PATA Adapter mPCIe only)
  • PCIe SATA (PATA Adapter mPCIe only)
  • Micro Drives (PATA Adapter MCB only)
  • PCIe USB (PATA Adapter mPCIe only)
Compliancy FCC, CE, RoHS
Warranty CRU provides a 2-year limited warranty for this product.

 

Für dieses Produkt gibt es noch keine Beurteilungen.

Neue Beurteilung

Mein Name


Meine Beurteilung Bitte beachten: HTML ist nicht verfügbar!

Bewertung Schlecht           Gut

Bitte den angezeigten Code einfügen