TABLEAU T35is Forensic Bridge

TABLEAU T35is Forensic Bridge
Views: 847 Art.Nr.: 1614
Gewicht: 0.6 kg
Verfügbarkeit: 4 - 6 Tage

TABLEAU OEM-style forensic bridges have long been a key component of today's modern forensic workstations. The Tableau T35is Forensic SATA/IDE Bridge is an economical, high‑performance alternative for forensic professionals whose acquisition needs focus on SATA and IDE hard-drives.

The T35is mounts in one 5.25" half-height drive bay at the front of a forensic workstation and connects to the host computer via one FireWire 800 and one SATA (optional) host connection. When both SATA and FireWire ports are connected to the host, the T35is provides intelligent, redundant data transfers. For maximum imaging speed, the T35is' SATA host connection should be used. Firmware updates are performed over the FireWire host connection.

The T35is bundle price includes the T35is and one each of the following: TC2-8 (traditional style power cable), TC5-8 (SATA style power cable), TC3-8 (SATA signal cable), TC6-8 (IDE signal cable), TDA5-25 and TDA5-18 (2.5" and 1.8" IDE notebook hard disk adapters).

As with all Tableau write-blockers, the T35is automatically defeats HPA and detects DCO regions on IDE and SATA drives. Tableau firmware updates and the Tableau Disk Monitor software are included.


Forensic SATA/IDE Bridge Tableau Model T35is

Connectors: Host side (Rear)


One SATA data connector


One FireWire 800 (9-pin, 1394B) connector

DC Input

One 4-pin male Molex connector for input DC power

Connectors: Device, Write-Blocked (Front Panel)


One SATA data connector


One 40-pin IDE data connector

DC Out

One 4-pin male Molex connector (power to SATA or IDE hard disk)



Controls power for devices connected to front panel

DIP Switch

4-position DIP switch configures user-selectable options

Other Features

Status LEDs

6 LEDs: Power ON, SATA Detect, IDE Detect, Host Detected, Write-block enabled, Drive activity

Factory Configuration

Read only


SATA Devices

SATA 1 or SATA 2 hard disk devices

IDE Devices

Parallel ATA hard disk devices with LBA (Logical Block Addressing) support

Host Interface

SATA, FireWire 800/400

Host O/S

Windows XP/Vista/7/Newer, Macintosh OS X, most Linux distributions (note: Linux distributions have varying levels and quality of support for FireWire 1394 A/B and SATA)

Physical / Environmental


4.5 watts typical operating (not including hard disk)

Supply voltage (DC IN from computer Molex)

+5VDC @ 3A, +12VDC @ 3A (includes budget for hard disk)

Output voltage (DC OUT)

+5VDC @ 1A, +12VDC @ 1A


5.75 in. (L) x 5.75 in. (W) x 1.625 in. (H)


8.1oz (230g)

Operating temperature range

0 to 55 degrees C (no airflow)

Storage temperature range

-40 to 70 degrees C

Relative humidity

Up to 90% (non-condensing)


Für dieses Produkt gibt es noch keine Beurteilungen.

Neue Beurteilung

Mein Name

Meine Beurteilung Bitte beachten: HTML ist nicht verfügbar!

Bewertung Schlecht           Gut

Bitte den angezeigten Code einfügen