MFC Dongle complete

MFC Dongle complete
Views: 1230 Art.Nr.: 2513
Verfügbarkeit: 33
278,00 € incl. 19 % MwSt. zzgl. Versandkosten Preis ohne MwSt. 233,61 €
+ Warenkorb Menge

Full Version Packaged with free iOS8 Adapter

A screen lock passcode is a good security measure. If you forget this passcode, One last-resort solution to this is resetting your device which deletes all your data and reverts the device to factory settings. From right now MFC Dongle with a special solution will never lost or distroy device Data which can automatically get the passcode easily.

What do we do?

Apple iPhone Support Models IOS 7.x & 8.x

-  iPhone 4
-  iPhone 4s
-  iPhone 5
-  iPhone 5s
-  iPhone 5c
-  iPhone 6
-  iPhone 6 Plus

Apple Mac Support Models

-  MacBook Air
-  MacBook Pro
-  MacBook Pro Retina

Apple iPad Support Models

-  iPad
-  iPad Air
-  iPad Mini

Samsung & HTC Android Mobile Models V4.3+

- All Samsung & HTC Android based Mobie Phones

Package Contents:

  • 1 x MFC Dongle
  • iPower iOS8 Adapter  Needed to work with iOS8 iPhones. Details Here
  • 1 x Light Sensor With Connection Cable
  • 1 x 3-in-1 Triple Charging Cable for connections to phones with 3 connectors which allows you to charge the phone you are brute forcing.:
    • Apple Lightning
    • Apple 30 Pin
    • Micro USB)
  • 1 x Boot Cable
  • Support via official support forum

How it works

About Samsung Android 4.3+ tested on Samsung Galaxy S5

Request for Version 1.0.3 or newer
This update will try 5 codes then 30 seconds of waiting
About 40 seconds / 5 codes (22 hours to try all codes) in some mobile phones the delay between codes will increase up to 10 seconds with more wrong codes so delay between codes must be around 10000ms(10seconds) so the waiting time will be 44 hours not 22. You must adjust the delay accordingly.

How to:
-  Connect the light sensor to the darkest place on the screen
-  Insert MFC dongle
-  Wait until unlock is ok (usually the MFC dongle will stop at that point)
-  Press read in MFC dongle update software and connect MFC dongle to computer to read the unlock codes

About HTC Android 4.3+ tested on HTC One

It will try 5 codes then wait 30 seconds while keeping the screen on ,about 40 seconds for 5 codes (22 hours for all 4 digits possible codes)
How to:
Unlock phone and go to the phone lock screen and insert MFC Dongle, Future update ... add code detection using light sensor

About Apple iPhone Version iOS 7.1.1 ?

Using this method unlock time si maximum 13.5 hours for all 9999 possible codes (1 codes each 5 seconds)

How To:
Update MFC dongle using Update 1 - iOS 7.1.1
write the appropriate settings using the software (the delay in milliseconds is 5000 for iOS 7.1.1) 5 seconds / code
connect the light sensor to the phone in a blank area (blue)
put a sim card inside the phone
call the sim card number
answer on the iPhone then go to Contacts
when the lock code is required insert MFC Dongle
if you get the message accessory not supported just press ok. Another message might also appear after first minute so you need to press ok to that too otherwise you might miss some codes during the time the message is displayed.
When we reach the correct code the screen will change to Contacts screen thus triggering the light sensor and the process will stop
you can now connect the MFC dongle to computer and click read button.

About Apple iPhone Version iOS 7.1.2 Auto Method ?

This will be request for Version 1.0.3 or new version.
This update will automatically try to find the code and require no user intervention.
Just connect MFC dongle to phone and unlocking will start.
The light sensor must be connected in such a way that after unlocking is done the light sensor will detect more like that initially detected. Usually this can be achieved if the light sensor is placed in the left top corner, where the message icon will be displayed after unlock.
The delay must be at least 4500 for correct function.

About Apple iPhone Version iOS 7.1.2 manual Method (phone is disabled) ?

This update will help you unlock your phone code even if the phone is disabled after too many retries.
The default delay for this update is about 4300 ms (4.3 seconds).
Update your MFC dongle using this update and connect the light sensor on the top right side of the iPhone screen.
Go to the phone disable screen and connect MFC dongle to phone and wait 5 seconds.
Swipe with your finger to go to Emergency calling.
The MFC dongle will automatically detect the swipe and try the next available code.
Then the phone will automatically come back to the phone lock screen.
To continue swipe again to the emergency screen and so on until your phone is unlocked.

How to get the latest Version for MFC ?

You must log in to www.mfcbox.com
Go to Download page
Download the MFCDL tools
Open the MFCDL.exe Press Start button to get the new version

Why can not download ?

First you must register an account on our site with valid Email , and verify your account with Token code (This code will be received by register email)
Once the email verified, then you can go to login page access to site
At User Dashboard please click Manage Memberships , Press Activate Membership buttons, then you will have full download permissions.

How to install the software & first update ?

Full setup guide has been madehere
Install Dongle Drivers from DongleDrivers directory by running InstallDriver.exe This will install mfc120.dll required for the program to start.
Install vcredist_x86 for 32 bits windows or vcredist_x64 for 64 bits windows from MicrosoftRedistributables directory
To install the dongle update driver you need to connect MFC dongle to computer in BOOT MODE (you can open notepad.exe first so all the oputput from MFC dongle will be written there). This will install libusb0.dll driver required for the program to start. In order to connect MFC dongle in BOOT MODE you need to connect GND pin P0(P zero) pin together using the RED cable we provided in the pack.
Disconnect MFC dongle.
Open the software and select the appropriate update and thick update.
Connect the MFC dongle again to computer and wait until update finishes. If program stops at [warn] > waiting for reconnect ... then you can take out the MFC dongle and connect again to computer.
Now you can write the settings if you did not do that at previous steps.

During unlocking the device battery finished
During unlocking the device battery finished what can i do ?

Q . You need start to from beginning ?
A . No , you no need to start from beginning, Dongle will auto saving the last code.
Q. What's the next step ?
A. You just need to recharge the device, Then back to work.

How do I find out which iOS the iPhone is running, before I try to use the MFC Dongle
A. Download iRecoveryWin32 - https://docs.google.com/file/d/0B3FQ9o0FwuJec2FxMkc1dTBmRkk/edit

Download the tool, unzip, run on a windows XP machine.
Install iTunes for the latest recovery mode drivers
Place device in recovery mode (must be Recovery Mode and not DFU Mode_
In command line run the command
iRecovery –s

Note the iBoot version, look it up on here: https://theiphonewiki.com/wiki/IBoot_%28Bootloader%29


Für dieses Produkt gibt es noch keine Beurteilungen.

Neue Beurteilung

Mein Name

Meine Beurteilung Bitte beachten: HTML ist nicht verfügbar!

Bewertung Schlecht           Gut

Bitte den angezeigten Code einfügen